Hallo zusammen,
ich hab ein relativ großes Problem.
Und zwar bekomme ich sehr häufig die Meldung "Fehler bei Seitenende" bei dem versuch ein Fax zu verschicken.
Es handelt sich hier um eine Win2K SP4, auf dem das Faxeware 10 installiert ist.
Als Modem fungiert ein US Robotics Courier-I ISDN V.34.
Merkwürdigerweiser, gehts an manche Faxnummer problem los raus, und an andere wieder nicht.
Hier das Log:
AT+FCLASS=0ATE0V1Q0X3&H2&I2&K0S0=0S7=60S40=6AT+FCLASS=2.0
OK
AT+FAA=1
OK
AT+FCR=1
OK
AT+FNR=1,1,1,0
OK
AT+FCC=1,0
OK
AT+FLI="Header"
OK
AT+FIS=1,5,0,2,0,0,0,0
OK
ATE0V1Q0X3&H2&I2&K0S0=0S7=60S40=6AT+FCLASS=2.0
OK
AT+FAA=1
OK
AT+FCR=1
OK
AT+FNR=1,1,1,0
OK
AT+FCC=1,0
OK
AT+FLI="Header"
OK
AT+FIS=1,5,0,2,0,0,0,0
OK
AT+FCLASS=2.0
OK
ATDT0089506009
+FCO
+FCI:" + 49 89 506009"
+FIS:1,5,0,2,1,0,0,3
OK
SendRec.PagesSent=0, SendRec.ErrorNo=0
Open D:\David\archive\user\10004000\out\M0013334.001
AT+FDT
+FCS:1,5,0,2,0,0,0,3
CONNECT
.
+FHS:54
OK
Und die TLD.ini:
[COMMON]
;CAUTION: Changes to the data of this file may cause several problems
; to the work of the TLD and your fax hardware. Please check
; before you make any changes to this file.
;
; Text, that is placed after a semicolon, will be ignored and is used
; for comments only.
BOARD=COM1
; Board number of the attached serial interface. With COMx boards the
; board number of the first installed interface board should be 0,
; the second 1, etc. With all the other interface boards not the board
; number, but the port number is incremented.
; Board = 0 corresponds to COM1
; Board = 1 corresponds to COM2
; Board = 2 corresponds to COM3
; Board = 3 corresponds to COM4
PORT=COM1
; Port number of the serial interface used. Usually, the port number
; of the first available interface is 0, that of the second is 1, etc.
HARDWARETYPE=1
; Hardware type stands for the type of interface hardware used.
; Every interface type has its own type number, with which it can be
; defined.
; Examples:
; HARDWARETYPE = 1 (Standard COMx)
; HARDWARETYPE = 3 (Novell WNIM)
; HARDWARETYPE = 102 (ATI Intelligent Board)
; HARDWARETYPE = 104 (ESP Board)
; HARDWARETYPE = 105 (DigiBoard Xi)
; HARDWARETYPE = 106 (DigiBoard Cx)
; HARDWARETYPE = 107 (DigiBoard Xem)
; HARDWARETYPE = 134 (DigiBoard Port Server)
NAME=US Robotics Courier
CLASS20=TRUE
RXSkipBytes=-1
INIT1=AT&F2
INIT=ATE0V1Q0X3&H2&I2&K0S0=0S7=60S40=6
FAXINIT=AT+FAA=1~AT+FCR=1~AT+FNR=1,1,1,0~AT+FCC=1,0
STOP=AT&F2
PAGESESSION=
HIGHSPEEDCONNECT=TRUE
FLOWCONTROL=1
RXFLOWCONTROL=0
RXBITORDERREVERSE=TRUE
Habt Ihr eine Idee, wäre für jede Hilfe dankbar.
Gruß mightymaster
Danke soweit 