Cant send fax with U.S Robotics 56k Faxmodem

[COMMON]


;CAUTION: Changes to the data of this file may cause several problems
;     to the work of the TLD and your fax hardware. Please check
;     before you make any changes to this file.
;
; Text, that is placed after a semicolon, will be ignored and is used
; for comments only.




BOARD=COM3
; Board number of the attached serial interface. With COMx boards the
; board number of the first installed interface board should be 0,
; the second 1, etc. With all the other interface boards not the board
; number, but the port number is incremented.
; Board = 0 corresponds to COM1
; Board = 1 corresponds to COM2
; Board = 2 corresponds to COM3
; Board = 3 corresponds to COM4


PORT=COM3
; Port number of the serial interface used. Usually, the port number
; of the first available interface is 0, that of the second is 1, etc.


HARDWARETYPE=1
; Hardware type stands for the type of interface hardware used.
; Every interface type has its own type number, with which it can be
; defined. 
; Examples:
; HARDWARETYPE = 1   (Standard COMx)
; HARDWARETYPE = 3   (Novell WNIM)
; HARDWARETYPE = 102 (ATI Intelligent Board)
; HARDWARETYPE = 104 (ESP Board)
; HARDWARETYPE = 105 (DigiBoard Xi)
; HARDWARETYPE = 106 (DigiBoard Cx)
; HARDWARETYPE = 107 (DigiBoard Xem)
; HARDWARETYPE = 134 (DigiBoard Port Server)




NAME=CLASS1 Generic Modem
PAGESESSION=
INIT1=AT&F
INIT=AT&FE0V1Q0X3S0=0S7=60S40=60H0
STOP=AT&FH0
RXSkipBytes= -1
RXBitOrderReverse=True
ADDAUTOEOP=TRUE
AcceptSingleEOP=TRUE

[COMMON]
;CAUTION: Changes to the data of this file may cause several problems
;         to the work of the TLD and your fax hardware. Please check
;         before you make any changes to this file.
;
; Text, that is placed after a semicolon, will be ignored and is used
; for comments only.




BOARD=/dev/ttyS0
; Board number of the attached serial interface. With COMx boards the
; board number of the first installed interface board should be 0,
; the second 1, etc. With all the other interface boards not the board
; number, but the port number is incremented.
; Board = 0 corresponds to COM1
; Board = 1 corresponds to COM2
; Board = 2 corresponds to COM3
; Board = 3 corresponds to COM4


PORT=/dev/ttyS0
; Port number of the serial interface used. Usually, the port number
; of the first available interface is 0, that of the second is 1, etc.


HARDWARETYPE=1
; Hardware type stands for the type of interface hardware used.
; Every interface type has its own type number, with which it can be
; defined.
; Examples:
; HARDWARETYPE = 1   (Standard COMx)
; HARDWARETYPE = 3   (Novell WNIM)
; HARDWARETYPE = 102 (ATI Intelligent Board)
; HARDWARETYPE = 104 (ESP Board)
; HARDWARETYPE = 105 (DigiBoard Xi)
; HARDWARETYPE = 106 (DigiBoard Cx)
; HARDWARETYPE = 107 (DigiBoard Xem)
; HARDWARETYPE = 134 (DigiBoard Port Server)




;aenderungen laut Q-106.808


;NAME=US Robotics 56K
;PAGESESSION=
;INIT1=AT&F
;INIT=ATE0&F&D2&C1&H1X1S7=55
;STOP=AT&FH0
;RXSkipBytes= -1
;RXBitOrderReverse=True
;AddAutoEOP=TRUE




NAME=U.S. Robotics 56k Faxmodem
PAGESESSION=
HIGHSPEEDCONNECT=TRUE
INIT1=AT&F
INIT=ATE0&F&D2&C1&H1X1S7=55
STOP=AT&F
RXSkipBytes= -1
RXBitOrderReverse=True
ADDAUTOEOP=TRUE


WaitForFPTS=FALSE
AnswerReset=TRUE




TLD_BINARY_PATH=tld/code/class1/tld