David V8+ Faxen

Hallo,

Bein faxen aus einem Client bekomme ich immer die folgende Fehlermeldung: Nummer fasch. und unter Admin wird gefaxt. Was könnte sein ?

Gruß Bo_mann

Hier solltest du mal einen Auszug aus dem TLD Protokoll posten.

Hallo Andreas,

Hier ist TLD Auszug.
__________________

[COMMON]
;Transport Layer Driver Initialization File for CAPI compatible boards.
;Refer manual for details.

Name = AVM-GmbH
; Default is none (left blank)
; Specifies the name of the ISDN-Board

CAPIVersion = 2
; Default is auto detect
; Valid are values 0 to 2
; 0 = Unknown
; 1 = CAPI 1.1 Interface
; 2 = CAPI 2.0 Interface

Controller = 1
; Default is 0 or 1 (see below)
; Specifies the number of the ISDN-Board which is to be used.
; For CAPI Version 1.1 the Controller starts with value 0.
; For CAPI Version 2.0 the Controller starts with value 1.

Routing = 1
; Default is 0
; Specifies the method of inbound routing.
; 0 is for no routing by TLD (CSID)
; 1 is for DDI routing
; 2 is for MSN routing

;DDIPrefix =
; Default is none (left blank)
; Takes only effect if Routing = 1
; See documentation for details.

DDILength = 3
; Default is 3
; Valid is 1-5
; Takes only effect if Routing = 1
; See documentation for details.

DDILenOnly = FALSE
; Default is False
; Valid is True or False
; Takes only Effect if Routing = 1
; Defines if the TLD should stop receiving DDI Informations if the
; expected DDI Substring has been received. If DDILenOnly is set to True
; the TLD connects more quick.

DDIOffset = -1
; Default is -1
; Valid is 1-10
; Takes only Effect if Routing = 1
; -1 : DDI will be taken from the end of the received DDI String
; 0-10 : DDI will be taken from the stated position within the DDI String

DDIRange = 0 - 0
; Default is none (left blank)
; Takes only Effect if Routing = 1
; Specifies the DDI range the TLD reacts on.

DDIOut =
b
; Default is none (left blank)
; Takes only Effect if Routing = 1
; Only necessary for some special PBX

;TxMSN = 0
; Default is 0
; Only necessary for some special PBX.

RxMSN =
; Default is none (left blank)
; Specifies the Multi Subscriper Numbers the TLD.NLM reacts on.
; Multiple MSN's can be specified, seperated by a comma
; See documentation for details.

DebugMode = 3
; Default is 3
; Specifies the depth of technical information recorded.
; Valid is 0 - 5
; 0 is for none
; 1 is for important messages only
; 5 is for any capi message

IsULaw = FALSE
; Default is False (Use A-Law)
; Specifies the local ISDN Voice coding format
; Valid is True or False
; In Europe A-Law is used, in america æ-Law.

AnswerDataCalls = TRUE
; Default is True
; Valid is True or False
; Specifies if datacalls (FaxPlus) should be answered by TLD.
; This parameter has to be set to FALSE if you want to run e. g. a MPR
; and the TLD on the same ISDN Controller.

;===========================================================================

;TimeOut = 60
; Default is 60
; Specifies the time (in seconds) before timeout message appears.

;ISDN_Service_FaxG3 = 1
; Default is 1
; Specifies the service which is used for outgoing fax (Group 3)
; 0 is for a/b services
; 1 is for analog phone

;DynamicCSID = True
; Default is True
; Valid is True or False
; Takes only Effect if Routing = 1
; Defines if a received DDI should be mirrored within the CSID.

;WaitForDisconnect = False
; Default is False
; Valid is True or False
; Defines if the TLD should not force disconnection at the end of fax.
; This parameter is necessary for Dr. Neuhaus 3009 Hybrid boards.

;HeaderLineFeed = 0
; Default is 0
; Valid is 0-37
; Specifies the number of pixel lines left blank before sending fax
; image. To avoid overlay with David headline.

;DefaultFaxPlus = False
; Default is False
; Valid is True or False
; Defines if the TLD should try to establish a FaxPlus connection first.
; True is for try FaxPlus before G3 call
; False is for no FaxPlus

;HandleUnloadEvent = True
; Default is True
; Valid is True or False
; Specifies if the TLD should ask for confirmation if the TLD is to be
; unloaded by using the UNLOAD command on the Server Console.
; True is for asking for confirmation
; False is for unloading without confirmation

;MaxTimeActive = 600
; Default is 600
; Specifies the maximum time for a voice connection (in seconds).

;MaxPageSize = 5.242.880
; Defines the maximum permissable size of a fax page. If this value is
; exeeded reception will be aborted.

;Optimized = 1
; Default is 1
; Valid are values 0 to 2
; If Optimized is set to 1, David will create A-Law copies of the played
; WAV files, which will be used in future. The advantage is a better
; system perfomance.

;ProtocolFromEntry = False
; Default is False
; Valid is True or False
; If ProtocolFromEntry is set to True, the CLI instead of the CSID will
; be placed within the From field of the receive log

;BeepOnRx = False
; Default is False
; Valid is True or False
; Specifies if the server should beep on an incoming call.

;FaxTxScript = False
; Default is False
; Valid is True or False
; Specifies if the server will process a fax job by starting the script.

;Script=\\SERVERNAME\DAVID\TLD\COMMON\TLD.DCC
; Default is \\SERVERNAME\DAVID\TLD\COMMON\TLD.DCC
; Specifies the script file that will be used by the TLD.

;BusyCharge =
; Defines a charge unit that will be charged when the distant station is
; busy
; Example: BusyCharge = 12

DisableFaxPolling = TRUE
; Defines whether or not fax polling calls are to be rejected.
; If DisableFaxPolling = TRUE is set, inbound fax polling calls will be immediately
; rejected. With some ISDN boards this setting results in faster acceptance of
; inbound faxes.

IHSAutoConfNumber =
IHSNUMBER =
IHSHOSTMODEMSN = TRUE
IHSTXNUMBER =
IHSPASSWORD =
IHSINTERVAL = 5
IHSFROMTO = 00:00 - 24:00
IHSTXNOSASU = 1
IHSNOTICETYPE = 0
IHSTXNOWAIT = TRUE
IHSDOREPLICATION = FALSE
IHSREPINTERVALL = 0
IHSREPARCHIVE = \

----------------------------------------
Gruß Bo_mann

Hi,

sorry hab mich vieleicht nicht ganz richtig ausgedrückt, ich meinte das Protokoll aus dem Portmonitor vom TLD.

Kostenschlüssel hast du beim User aber nicht aus versehen einen drinstehen oder ?

Hallo Andreas,

Hier der DTL-Auszug
-------------------------------------------------
DISCONNECT_IND (0x3481) Unallocated (unassigned) number
DISCONNECT_RESP
ISDN_API_RELEASE (ApplID: 1)
ISDN_API_REGISTER (ApplID: 1)
RECEIVE DISABLE
Selected Protocol : Fax (T30)
CONNECT_REQ 286002336809222
CONNECT_CONF
DISCONNECT_IND (0x3481) Unallocated (unassigned) number
DISCONNECT_RESP
ISDN_API_RELEASE (ApplID: 1)
ISDN_API_REGISTER (ApplID: 1)
RECEIVE DISABLE
RECEIVE DISABLE
RECEIVE DISABLE
Selected Protocol : Fax (T30)
CONNECT_REQ 002336809222
CONNECT_CONF
CONNECT_ACTIVE_IND
CONNECT_ACTIVE_RESP
CONNECT_B3_REQ
CONNECT_B3_CONF
CONNECT_B3_ACTIVE_IND
CONNECT_B3_ACTIVE_RESP
Open: D:\David\archive\user\00000000\out\M035E194.001
DISCONNECT_B3_REQ
DISCONNECT_B3_IND
Speed : 14400
Resolution : 1
Pages : 1
ID : +492336809222
DISCONNECT_B3_RESP
DISCONNECT_REQ
DISCONNECT_CONF
DISCONNECT_IND
DISCONNECT_RESP
ISDN_API_RELEASE (ApplID: 1)
ISDN_API_REGISTER (ApplID: 1)
RECEIVE DISABLE
Selected Protocol : Fax (T30)
CONNECT_REQ 286002336809222
CONNECT_CONF
DISCONNECT_IND (0x3481) Unallocated (unassigned) number
DISCONNECT_RESP
ISDN_API_RELEASE (ApplID: 1)
ISDN_API_REGISTER (ApplID: 1)
RECEIVE DISABLE
RECEIVE DISABLE
RECEIVE DISABLE
Selected Protocol : Fax (T30)
CONNECT_REQ 286002336809222
CONNECT_CONF
DISCONNECT_IND (0x3481) Unallocated (unassigned) number
DISCONNECT_RESP
ISDN_API_RELEASE (ApplID: 1)
ISDN_API_REGISTER (ApplID: 1)
RECEIVE DISABLE
RECEIVE DISABLE
RECEIVE DISABLE
Selected Protocol : Fax (T30)
CONNECT_REQ 286002336809222
CONNECT_CONF
DISCONNECT_IND (0x3481) Unallocated (unassigned) number
DISCONNECT_RESP
ISDN_API_RELEASE (ApplID: 1)
ISDN_API_REGISTER (ApplID: 1)
RECEIVE DISABLE
Selected Protocol : Fax (T30)
CONNECT_REQ 286002336809222
CONNECT_CONF
DISCONNECT_IND (0x3481) Unallocated (unassigned) number
DISCONNECT_RESP
ISDN_API_RELEASE (ApplID: 1)
ISDN_API_REGISTER (ApplID: 1)
RECEIVE DISABLE
Selected Protocol : Fax (T30)
CONNECT_REQ 286002336809222
CONNECT_CONF
DISCONNECT_IND (0x3481) Unallocated (unassigned) number
DISCONNECT_RESP
ISDN_API_RELEASE (ApplID: 1)
ISDN_API_REGISTER (ApplID: 1)
RECEIVE DISABLE
RECEIVE DISABLE
Selected Protocol : Fax (T30)
CONNECT_REQ 286002336809222
CONNECT_CONF
DISCONNECT_IND (0x3481) Unallocated (unassigned) number
DISCONNECT_RESP
ISDN_API_RELEASE (ApplID: 1)
ISDN_API_REGISTER (ApplID: 1)
RECEIVE DISABLE
RECEIVE DISABLE
Selected Protocol : Fax (T30)
CONNECT_REQ 286002336809222
CONNECT_CONF
DISCONNECT_IND (0x3481) Unallocated (unassigned) number
DISCONNECT_RESP
ISDN_API_RELEASE (ApplID: 1)
ISDN_API_REGISTER (ApplID: 1)
------------------------------------
Für die Kostenstelle: Wenn ich beim Client eine Zahl eingebe, wird beim Faxen (Nummer falsch) aber ich sie rausnemme dann bekome ich belegt.

Gruß Bo_mann

Hallo Andreas,

Ich habe gerade das Problem gelöst, und zwar auf den David-Server für den User das Recht Kostenschlüssel mitwählen entnommen. Es aht funkioniert.

Dannke Schöne.

Bo_mann