Hallo
Beim Faxempfang über ein analoges Modem von U.S. Robotics kommt es zu einem eigenartigen Verhalten. Das Modem geht ran und führt dann ein Reset aus. Dabei erkennt Tobit auch keinen Fehler. Ich hab 0% Fehler auf dem Port-Monitor. Leider empfängt er auch keine Faxe. Der Versand funktioniert problemlos.
Hier meine TLD.INI:
Code
[COMMON]
;CAUTION: Changes to the data of this file may cause several problems
; to the work of the TLD and your fax hardware. Please check
; before you make any changes to this file.
;
; Text, that is placed after a semicolon, will be ignored and is used
; for comments only.
BOARD=COM1
; Board number of the attached serial interface. With COMx boards the
; board number of the first installed interface board should be 0,
; the second 1, etc. With all the other interface boards not the board
; number, but the port number is incremented.
; Board = 0 corresponds to COM1
; Board = 1 corresponds to COM2
; Board = 2 corresponds to COM3
; Board = 3 corresponds to COM4
PORT=COM1
; Port number of the serial interface used. Usually, the port number
; of the first available interface is 0, that of the second is 1, etc.
HARDWARETYPE=1
; Hardware type stands for the type of interface hardware used.
; Every interface type has its own type number, with which it can be
; defined.
; Examples:
; HARDWARETYPE = 1 (Standard COMx)
; HARDWARETYPE = 3 (Novell WNIM)
; HARDWARETYPE = 102 (ATI Intelligent Board)
; HARDWARETYPE = 104 (ESP Board)
; HARDWARETYPE = 105 (DigiBoard Xi)
; HARDWARETYPE = 106 (DigiBoard Cx)
; HARDWARETYPE = 107 (DigiBoard Xem)
; HARDWARETYPE = 134 (DigiBoard Port Server)
NAME=CLASS2-NATIVE
PAGESESSION=
INIT=ATE0&F&D2&C1&H1X1S7=55
STOP=AT&F
ADDAUTOEOP=TRUEDen INIT und ADDAUTEOP hab ich von der Tobit-Seite. Das Stand dort als Kommentar für das U.S. Robotics Faxmodem. Hat jemand schon Erfahrungen damit?
Gruss, Benjamin