Hallo,
ich verwende hier ein Smartusb56 Faxmodem, das über USB angebunden ist. Bevor ich versucht hatte, hinzubekommen, dass man über das Modem auch Faxe versenden kann, klappte der Faxempfang einwandfrei. Nun funktioniert er gar nicht mehr.
Ruft man das Fax an, wird im Protokoll ein "Ring" signalisiert aber das Modem geht nicht dran.
Auch das Heraussenden funktioniert nicht über Tobit.
Am Windowsfaxdienst ohne Tobit hatte der Versand aber schon funktioniert, daher vermute ich, dass beides ein Tobitproblem ist, aber Tobit weigert sich ja für USB-Modems Support zu geben.
Protokoll:
AT&F
OK
AT&FE0V1Q0X3S0=0S7=60S40=60H0
OK
ATI0
OK
AT+A8E=6,5
OK
Use V.34
AT+FCLASS=1
OK
AT+F34=0,0,0,0,0
ERROR
AT+FTM=?
24,48,72,96,97,98,121,122,145,146
OK
AT+FRM=?
24,48,72,96,97,98,121,122,145,146
OK
RING
RING
AT+A8E=6,5
OK
Use V.34
AT+FCLASS=1
OK
AT+F34=0,0,0,0,0
ERROR
RING
TLD.ini
[COMMON];CAUTION: Changes to the data of this file may cause several problems
; to the work of the TLD and your fax hardware. Please check
; before you make any changes to this file.
;
; Text, that is placed after a semicolon, will be ignored and is used
; for comments only.
BOARD=COM3
; Board number of the attached serial interface. With COMx boards the
; board number of the first installed interface board should be 0,
; the second 1, etc. With all the other interface boards not the board
; number, but the port number is incremented.
; Board = 0 corresponds to COM1
; Board = 1 corresponds to COM2
; Board = 2 corresponds to COM3
; Board = 3 corresponds to COM4
PORT=COM3
; Port number of the serial interface used. Usually, the port number
; of the first available interface is 0, that of the second is 1, etc.
HARDWARETYPE=1
; Hardware type stands for the type of interface hardware used.
; Every interface type has its own type number, with which it can be
; defined.
; Examples:
; HARDWARETYPE = 1 (Standard COMx)
; HARDWARETYPE = 3 (Novell WNIM)
; HARDWARETYPE = 102 (ATI Intelligent Board)
; HARDWARETYPE = 104 (ESP Board)
; HARDWARETYPE = 105 (DigiBoard Xi)
; HARDWARETYPE = 106 (DigiBoard Cx)
; HARDWARETYPE = 107 (DigiBoard Xem)
; HARDWARETYPE = 134 (DigiBoard Port Server)
NAME=CLASS1 Generic Modem
PAGESESSION=
INIT1=AT&F
INIT=AT&FE0V1Q0X3S0=0S7=60S40=60H0
STOP=AT&FH0
RXSkipBytes= -1
RXBitOrderReverse=True
USEV34=TRUE
ADDAUTOEOP=TRUE
ACCEPTSINGLEEOP=TRUE